|
姓名:Wen-Cheng Kuo
現職暨職稱:國立高雄第一科技大學機械與自動化工程學系 助理教授
聯絡電話:07-6011000;07-6011000 轉2295
電子郵件:rkuo@ccms.nkfust.edu.tw
Research Interests
The integration with RF coils, parylene based chip and ASIC die for
wireless bio-implantable system
MEMS electret microphone
Implantable high-Q inductor
The design and fabrication of high-aspect-ratio micro suspended structures
ICP-RIE etching
The design and fabrication of screw compressor rotors
The design and fabrication of optical switches
Education
美國加州理工學院電機系博士後研究
國立台灣大學 機械工程 博士
國立交通大學 機械工程 碩士
國立中山大學 機械工程 學士
Now
國立高雄第一科技大學 機械與自動化工程系 助理教授
Career & Professional Activities
復盛工業股份有限公司生產技術專員
同協電子股份有限公司總經理特助
國立台灣大學機械系博士後研究員
美國加州理工學院電機系博士後研究員
美國加州理工學院電機系訪問學者
Honor
獲國科會與台灣大學公費補助赴美研習一年
擔任2008年IEEE NEMS2008 會議Sensors and Actuators section主席與 Nanomaterials section副主席
Publications
(Journal articles)
1. Yao-Joe Yang and Wen-Cheng Kuo, “A Novel Fabrication Method for Suspended High-Aspect-Ratio Microstructures”, Journal of Micromechanics and Microengineering, Vol. 15, 2005, pp. 2184-2193. (SCI, Impact Factor: 1.93, Category: Mechanics, Rank: 10/112, NSC project No: NSC-93-2212-E-002-023)
2. Yao-Joe Yang, Wen-Cheng Kuo, and Kuang-Chao Fan, “Single-Run Single-Mask Inductively Coupled Plasma-Reactive Ion Etching Process for Fabricating Suspended High-Aspect-Ratio Micro Electro Mechanical Structures”, Japanese Journal of Applied Physics, Vol. 45, No. 1A, 2006, pp. 305-310. (SCI, Impact Factor: 1.247, Category: Applied Physics, Rank: 50/94, NSC project No: NSC 92-2212-E-002-084)
3. Wu-Lang Lin, Kuang-Chao Fan, Li-Hung Chiang, Wen-Cheng Kuo, and Yao-Joe Yang, “A Novel Micro/Nano 1×4 Mechanical Optical Switch”, Journal of Micromechanics and Microengineering, Vol. 16, 2006, pp. 1408-1415. (SCI, Impact Factor: 1.93, Category: Mechanics, Rank: 10/112, NSC project No: NSC 93-2212-E-002-021,NSC 93-2212-E-002-024)
4. Yao-Joe Yang, Bo-Ting Liao, and Wen-Cheng Kuo, “A Novel 2X2 MEMS Optical Switch Using the Split-Cross-Bar (SCB) Design”, Journal of Micromechanics and Microengineering, Vol. 17, 2007, pp. 875-882. (SCI, Impact Factor: 1.93, Category: Mechanics, Rank: 10/112, NSC project No: NSC-94-2212-E-002-060)
5. Yao-Joe Yang, Wen-Cheng Kuo, Kuang-Chao Fan, and Wu-Lang Lin, “A 1X2 optical switch using a dual-thickness SOI process”, Journal of Micromechanics and Microengineering, Vol. 17, 2007, pp. 1034-1041. (SCI, Impact Factor: 1.93, Category: Mechanics, Rank: 10/112, NSC project No: NSC-93-2212-E-002-023)
Conference papers
(International conference)
1. Wen Cheng Kuo and Yao-Joe Yang, “Design and fabrication of 1X2 optical fiber switch”, 7th International Conference on Mechanics Technology (ICMT 2003), Taipei, Taiwan R.O.C, Dec. 2003, pp. 421-424.
2. Wen-Cheng Kuo and Yao-Joe Yang, "A novel fabrication method for suspended high-aspect-ratio MEMS structures", in Proceedings 13th International Conference on Solid-State Sensors and Actuators and Microsystems (Transducers 2005), Seoul, South Korea, Jun. 2005, pp. 1126-1129.
3. Wen-Cheng Kuo and Yao-Joe Yang, “Design and fabrication of 1X2 optical fiber switch”, 9th International Conference on Mechanics Technology (ICMT 2005), Malaysia, Kuala Lumpur , Dec. 2005.
4. Bo-Ting Liao, Wen-Cheng Kuo, and Yao-Joe Yang, “Development of a new micromachined 2X2 optical switch without optical misalignment”, The Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT 2006), Singapore, Jun. 2006.
5. Hsi-wen Lo, Wen-Cheng Kuo, and Yu-Chong Tai, “Recrystallized parylene as a mask for silicon chemical etching”, The proceedings of the IEEE International Conference of Nano/Micro Engineered and Molecular Systems (NEMS 2008), China, Sanya, Jan. 2008.
6. Po-Jui Chen, Wen-Cheng Kuo, Wen Li, and Yu-Chong Tai, “Q-enhanced folded-and-bond MEMS inductors”, The proceedings of the IEEE International Conference of Nano/Micro Engineered and Molecular Systems (NEMS 2008), China, Sanya, Jan. 2008.
7. Chia-Yen Lee, Yu-Hsiang Wang, Lung-Ming Fu, Rong-Hua Ma, Po-Cheng Chou, and Wen-Cheng Kuo, “A MEMS-based Weather Station”, Smart Systems Integration 2009 (SSI2009), Belgium, Brussels, Mar. 2009.
(Domestic conference)
1. Wen-Cheng Kuo and Yao-Joe Yang, "A novel fabrication method for suspended high-aspect-ratio microstructures", in Proceedings 8th Conference on Nanotechnology and Micro System, Hsinchu, Taiwan, Dec. 2004, pp. 17-20.
2. Kuang-Chao Fan,Wu-Lang Lin , Li-Hung Chiang and Wen-Cheng Kuo, "A novel micro/nano 1×4 mechanical optical switch", 22nd National Conference on Mechanical Engineering (The Chinese Society of Mechanical Engineers, CSME 2005), Jhong-Li, Taiwan, Nov. 2005, pp. 609-613.
3. Wen-Cheng Kuo and Yao-Joe Yang, "Design and fabrication of 1X2 optical fiber switch", in Proceedings 10th Conference on Nanotechnology and Micro System, Hsinchu, Taiwan, Dec. 2006.
4. Chia-Yen Lee, Shih-Chuan Chen, Wen-Cheng Kuo, Che-Hsin Lin, and Che-Ming Chiang, “Design and Fabrication of MEMS-Based Chromatography Columns”, The Proceedings of the Sixth National Conference on Precision Manufacturing (SME2008), Taiwan R.O.C., Tainan, Nov. 2008.
Recent Projects
新形大位移低驅動力之微形雙穩態機構設計與應用,97.11.01~98.07.31,國科會 NSC 97-2218-E-327-002,主持人
微/奈米技術於NxN光開關系統之發展-子計畫二:NxN複合式光開關之研製(3/3),96.8.1~97.7.31,國科會 NSC 96-2212-E-002-063 ,博士後研究員
微/奈米技術於NxN光開關系統之發展-子計畫二:NxN複合式光開關之研製(2/3),95.8.1~96.7.31,國科會 NSC 95-2212-E-002-239 ,博士後研究員
微/奈米技術於NxN光開關系統之發展-子計畫二:NxN複合式光開關之研製(1/3),94.8.1~95.7.31,國科會 NSC 94-2212-E-002-060 ,博士後研究員
Other
專利:
Yao-Joe Yang, Kuang-Chao Fan and Wen-Cheng Kuo, “MEMS optical fiber-to-fiber switches”, Taiwan Patent No. M 252940. |
|