首頁 > 指導教授

 

著作目錄 (Publication List)

 

台大機械系 楊燿州 (Yao-Joe Yang)

 

(A)          Journal Articles ( *Corresponding Author)

 

註一:通訊作者以 * 標示

註二:自2009/8/1起,本人領導的研究團隊所發表的論文,主持人(Y.-J. Yang)將列為最後一位作者,以符合所屬研究領域的國際慣例。

 

1. H.-W. Huang, F.-W. Lee, and Y.-J. Yang*, “Design Criteria for a Push-On Push-Off MEMS Bistable Device,” IEEE/ASME Journal of Microelectromechanical Systems (JMEMS), Vol. 25, No. 5, pp. 900-908  (2016) (SCI/EI) (DOI: 10.1109/JMEMS.2016.2574874)

2.

F.-W. Lee, C.-W. Ma, Y.-H. Lin, P.-C. Huang, Y.-L. Su and, Y.-J. Yang*, “A Micromachined Photo-Supercapacitor Integrated with CdS-Sensitized Solar Cells and Buckypaper,” Sensors and Materials, Vol. 28, No. 7, pp. 749-756  (2016) (SCI/EI) (http://dx.doi.org/10.18494/SAM.2016.1233)

3.

F.-W. Lee, W.-H. Hung, C.-W. Ma, and Y.-J. Yang*, “Polymer-Based Disposable Microneedle Array with Insertion Assisted by Vibrating Motion,” Biomicrofluidics, Vol. 10, 011905 (2016) (SCI/EI) (doi: 10.1063/1.4939948)

4.

C.-W. Ma, C.-M. Chang, T.-H Lin, and Y.-J. Yang*, “Highly Sensitive Tactile Sensing Array Realized Using a Novel Fabrication Process with Membrane Filters,” IEEE/ASME Journal of Microelectromechanical Systems (JMEMS), Vol. 24, No. 6, pp. 2062-2070 (2015) (SCI/EI) (doi: 10.1109/JMEMS.2015.2469252)

5.

C.-W. Ma, C.-M. Chang, P.-C Huang, and Y.-J. Yang*, “Sea-Urchin-Like ZnO Nanoparticle Film for Dye-Sensitized Solar Cells,” Journal of Nanomaterials, Article ID 679474, (2015) (SCI/EI) (doi: 10.1155/2015/679474)

6.

C.-W. Ma, F.-W. Lee, H.-H Liao, W.-C. Kuo, and Y.-J. Yang*, “Low-Actuation-Voltage MEMS Digital-to-Analog Converter with Parylene Spring Structures,” Sensors, Vol. 15, pp. 21567-21580 (2015) (SCI/EI) (doi: 10.3390/s150921567)

7.

J.-C. Kuo, H.-W. Huang, S.-W. Tung, and Y.-J. Yang*, “A hydrogel-based intravascular microgripper manipulated using magnetic fields,” Sensors and Actuators A: Physical, Vol. 211, pp. 121-130 (2014) (SCI/EI) (doi: 10.1016/j.sna.2014.02.028)

8.

Y.-T. Lai, J.-C. Kuo and Y.-J. Yang*, “A Novel Gas Sensor Using Polymer-dispersed Liquid Crystal Doped with Carbon Nanotubes,” Sensors and Actuators A: Physical, Vol. 215, pp. 83-88 (2014) (SCI/EI) (doi: 10.1016/j.sna.2013.12.021)

9.

S.-W. Tung, L.-S. Hsu, C.-H. Kuo, Y.-J. Yang*, “Developing Barbed Microtip-Based Electrode Arrays For Biopotential Measurement,” Sensors, Vol. 14, pp. 12370-12386 (2014) (SCI/EI) (doi: 10.3390/s140712370)

10.

Y.-T. Lai, J.-C. Kuo and Y.-J. Yang*, “Polymer-dispersed liquid crystal doped with carbon nanotubes for dimethyl methylphosphonate vapor-sensing application,” Applied Physics Letters, Vol. 102, No.19, pp. 191912 (2013) (SCI/EI) (doi: 10.1063/1.4804297)

11.

J.-C. Kuo, P.-H. Kuo, Y.-T. Lai, C.-W. Ma, S.-S. Lu, and Y.-J. Yang*, “A Passive Inertial Switch Using MWCNT-hydrogel Composite with Wireless Interrogation Capability,” IEEE/ASME Journal of Microelectromechanical Systems (JMEMS), Vol. 22, No. 3, pp. 646-654 (2013) (SCI/EI) (doi: 10.1109/jmems.2012.2237385)

12.

H.-W. Huang and Y.-J. Yang*, “A MEMS Bistable Device with Push-On-Push-Off Capability,” IEEE/ASME Journal of Microelectromechanical Systems (JMEMS), Vol. 22, No. 1, pp. 7-9 (2013) (SCI/EI)  (doi: 10.1109/jmems.2012.2228165)

13.

S.-W. Tung, Y.-C. Lan and Y.-J. Yang*, “Forming Carbon-Nanotube Clusters Using Dielectrophoresis for Respiratory Sensing Applications,” Sensors and Materials, Vol. 25, No. 9, pp. 583-590 (2013) (SCI/EI)

14.

J.-C. Kuo, C.-S. Li, H.-C. Cheng, and Y.-J. Yang*, “Suspended magnetic polymer structures fabricated using dose-controlled UV exposure,” Micro & Nano Letters, Vol. 8, No. 10, pp. 676-680. (2013) (SCI/EI) (doi: 10.1049/mnl.2013.0438)

15.

P.-C. Huang, T.-H. Tsai and Y.-J. Yang*, “Wide-bandwidth Piezoelectric Energy Harvester Integrated with Parylene-C Beam Structures,” Microelectronic Engineering, Vol. 111, pp. 214-219  (2013) (SCI/EI) (doi: 10.1016/j.mee.2013.03.158)

16.

C.-W. Ma, P.-C. Huang, J.-C. Kuo, W.-C. Kuo and Y.-J Yang*, “A Novel Inertial Switch with an Adjustable Acceleration Threshold using an MEMS Digital-to-Analog Converter,” Microelectronic Engineering, Vol. 110, pp. 374-380 (2013) (SCI/EI) (doi: 10.1016/j.mee.2013.02.069)

17.

Y.-T. Lai, Y.-M. Chen and Y.-J. Yang*, “A Novel CNT-PDMS-Based Tactile Sensing Array with Resistivity Retaining and Recovering by Using Dielectrophoresis Effect,”  IEEE/ASME Journal of Microelectromechanical Systems (JMEMS), Vol. 21, No.1, pp. 217-223 (2012) (SCI/EI)  (doi: 10.1109/ JMEMS.2011.2174422)

18.

Y.-T. Lai, Y.-M. Chen, T. Liu and Y.-J. Yang*, “A tactile sensing array with tunable sensing ranges using carbon nanotubes dispersed in liquid crystal composites,” Sensors and Actuators A: Physical, Vol. 177, pp. 48-53 (2012) (SCI/EI) (doi: 10.1109/jmems.2011.2174422)

19.

H.-W. Huang and Y.-J. Yang*, “Characterization of an 2x2 SCB Optical Switch Integrated with VOA,” AUSMT, Vol. 2, No. 2, pp. 121-131 (2012) (doi: 10.5875/ausmt.v2i2.107)

20.

P.-H. Kuo, Y.-J. Huang, H.-H. Liao, Y.-J. Yang, T. Wang, Y.-H. Wang, S.-S. Lu, “A Controlled-release Drug Delivery System on a Chip Using Electrolysis,” IEEE Transactions on Industrial Electronics, Vol. 59, No. 3, pp. 1578-1587 (2012) (SCI/EI) (doi: 10.1109/tie.2011.2160135)

21.

Y.-J. Huang, H.-H. Liao, P.-L. Huang, T. Wang, Y.-J. Yang, Y.-H. Wang, and S.-S. Lu, “An implantable release-on-demand CMOS drug delivery SoC using electrothermal activation technique,” ACM J. Emerg. Technol. Comput. Syst., Vol. 8, Issue 2, Article No. 12 (2012) (SCI/EI) (doi: 10.1145/2180878.2180884)

22.

Y.-M. Chen, Y.-T. Lai and Y.-J. Yang*, “Polymer-based carbon-nanotube film with reversible signal tracking capabilities,” Materials Letters, Vol. 65, pp. 3533-3536 (2011) (SCI/EI) (doi: 10.1016/j.matlet.2011.07.071)

23.

C.-C. Chen, C.-W. Kuo and Y.-J. Yang*, “Generating Passive Compact Models for Piezoelectric Devices,” IEEE Transaction on CAD, Vol. 30, pp. 464-467  (2011) (SCI/EI) (doi: 10.1109/tcad.2010.2090750)

24.

W.-W. Chang, T.-J. Sung, H.-W. Huang, W.-C. Hsu, C.-W. Kuo, J.-J. Chang, Y.-T. Hou, Y.-C. Lan, W.-C. Kuo, Y.-Y. Lin and Y.-J. Yang*, “A Smart Medication System Using Wireless Sensor Network Technologies,” Sensors and Actuators A: Physical, Vol. 172, pp. 315-321 (2011) (SCI/EI) (doi: 10.1016/j.sna.2011.03.022)

25.

B. T. Chia, H.-H. Liao, and Y.-J. Yang*, “A Novel Thermo-pneumatic Peristaltic Micropump with Low Temperature Elevation on Working Fluid,” Sensors and Actuators A: Physical, Vol. 165, pp. 86-93 (2011) (SCI/EI) (doi: 10.1016/j.sna.2010.02.018

26.

M.-Y. Cheng, C.-M. Tsao, Y.-Z. Lai and Y.-J. Yang*, “The development of a highly twistable tactile sensing array with stretchable helical electrodes,” Sensors and Actuators A: Physical, vol. 166, pp. 226-233 (2011) (SCI/EI) (doi: 10.1016/j.sna.2009.12.009

27.

B. T. Chia, X.-Y. Yang, M.-Y. Cheng, C.-W. Lin, and Y.-J. Yang*, “An electromagnetically-driven microfluidic platform with indirect-heating thermo-pneumatic valves,” BioChip Journal, Vol. 5, No 2 (2011) (SCI/EI) (doi: 10.1007/s13206-011-5201-5)

28.

B. T. Chia, S.-A. Yang, M.-Y. Cheng, C.-W. Lin, and Y.-J. Yang*, “A Self-contained Portable Polymerase-Chain-Reaction System Integrated with Electromagnetic Mini-actuators for Bi-directional Fluid Transport,” Journal of Mechanics, Vol. 27, No. 3, pp. 357-364 (2011) (SCI/EI) (doi: 10.1017/jmech.2011.38)

29.

W.-P. Shih, C.-L. Lee, C.-W. Lee, L.-C. Tsao, Y.-J. Yang, and K.-C. Fan, “A comparison of polymer composites for development of flexible sensor array,” Journal of the Chinese Society of Mechanical Engineers, Vol. 32, No.3, pp. 267-272 (2011) (SCI/EI)

30.

B.-T. Liao, H.-H. Liao, S.-C. Shih, and Y.-J. Yang*, “Development of a 2x2 optical switch using bi-stable solenoid-based actuators,” Journal of the Chinese Society of Mechanical Engineers, (Accepted) (2010) (SCI/EI) (doi: 10.1109/omems.2010.5672152)

31.

M.-Y. Cheng, C.-L. Lin, Y.-T. Lai, Y.-J. Yang*, “A Polymer-Based Capacitive Sensing Array for Normal and Shear Force Measurement,” Sensors, Vol. 10, pp. 10211-10225 (2010) (SCI/EI) (doi: 10.3390/s10111021)

32.

H.-H. Liao and Y.-J. Yang*, “A Micromirror Module using an MEMS Digital-to-Analog Converter and its Application for Optical Surface Profiling,” Journal of Micromechanics and Microengineering, Vol. 20 (2010) 105009 (SCI/EI) (doi: 10.1088/0960-1317/20/10/105009)

33.

B.-T. Liao, B. T. Chia, S.-C. Shih, K.-C. Fan, and Y.-J. Yang*, “A 2x2 Split Cross-bar Optical Switch Using a Hybrid Actuation Configuration,” IEEE/OSA Journal of Lightwave Technology, Vol. 28, pp. 2905-2911 (2010) (SCI/EI) (doi: 10.1109/jlt.2010.2070834)

34.

W.-P. Shih*, L.-C. Tsao, M.-Y. Cheng, C. Chang, Y.-J. Yang, and K.-C. Fan, “Flexible temperature sensor array based on a graphite-polydimethlysiloxane composite,” Sensors, Vol. 10, pp. 3597-3610 (2010) (SCI/EI)

35.

B.-T. Liao, H.-H. Shen, H.-H. Liao and Y.-J. Yang*, “A Bi-stable 2x2 Optical Switch Monolithically Integrated with Variable Optical Attenuators,” Optics Express, Vol. 17, No. 22, pp. 19919-19925 (2009) (SCI/EI) (doi: 10.3390/s100403597)

36.

M.-Y. Cheng, X.-H. Huang and Y.-J. Yang*, “A flexible capacitive tactile sensing array with floating electrodes,” Journal of Micromechanics and Microengineering, vol. 19, pp. 1-10 (2009) (SCI/EI) (doi: 10.1088/0960-1317/19/11/115001)

37.

S.-H. Chen, K.-C. Fan, T.-T. Chung, and Y.-J. Yang, “A NXN Architecture for 2-D Mirror-Type Optical Switches,” IEEE/OSA Journal of Lightwave Technology, Vol. 27, No. 14, pp. 2843-2851 (2009) (SCI) (doi: 10.1109/jlt.2009.2017280)

38.

K.-C. Fan, W.-L. Lin, L.-H. Chiang, S.-H. Chen, T.-T. Chung, and Y.-J. Yang, “A 2x2 mechanical optical switch with a thin MEMS mirror,” IEEE/OSA Journal of Lightwave Technology, Vol. 27, No. 9, pp. 1-13 (2009) (SCI/EI) (doi: 10.1109/JLT.2008.928955)

39.

Y.-J. Yang*, M.-Y. Cheng, S.-C. Shih, X.-H. Huang, C.-M. Tsao, F.-Y. Chang, and K.-C. Fan, “A 32×32 temperature and tactile sensing array using PI-copper films,” International Journal of Advanced Manufacturing Technology, Vol. 46, pp. 945-956 (2010) (SCI/EI) (doi: 10.1007/s00170-009-1940-z)

40.

Y.-J. Yang* and B.-T. Liao, “A Novel 4x4 Optical Switch Using An Anisotropically-etched Micro-mirror Array and A Bi-stable Mini-actuator Array,” IEEE Photonic Technology Letters, Vol. 21, No. 2, pp. 115-117 (2009) (SCI/EI) (doi: 10.1109/LPT.2008.2009127)

41.

Y.-J. Yang* and H.-H. Liao, “Development and characterization of thermopneumatic peristaltic Micropumps,” Journal of Micromechanics and Microengineering (JMM), Vol. 19, No. 2, pp. 1-13 (2009) (SCI/EI) (doi: 10.1088/0960-1317/19/2/025003)

42.

Y.-J. Yang*, B.-T. Liao, S.-C. Shih, and K.-C. Fan, “The Development of An 8x8 Optical Switch,” Journal of the Chinese Institute of Engineers, Vol. 33, No.1, pp. 37-49 (2009) (SCI/EI)

43.

Y.-J. Yang*, M.-Y. Cheng, C.-L. Lin, C.-M. Tsao, S.-A. Yang, W.-P. Shih, F.-Y. Chang, and K.-C. Fan, “A Wireless Flexible Temperature and Tactile Sensing Array for Robot Applications,” Proceeding of SPIE, Hefei, Anhui, China, Aug. 25-292008(EI)

44.

Y.-J. Yang* and C.-W. Kuo “Generating Scalable and Modular Macromodels for Microchannels using the Galerkin-based Technique,” IEEE Transaction on CAD, Vol. 27, No. 9, pp. 1545-1554 (2008) (SCI/EI) (doi: 10.1109/tcad.2008.927764)

45.

Y.-J. Yang*, M.-Y. Cheng, W.-Y. Chang, L.-C. Tsao, S.-A. Yang, W.-P. Shih, F.-Y. Chang, S.-H. Chang, and K.-C. Fan, “An Integrated Flexible Temperature and Tactile Sensing Array Using PI-copper Films,” Sensors and Actuators A: Physical, Vol. 143, No. 1, pp. 143-153 (2008) (SCI/EI) (doi: 10.1016/j.sna.2007.10.077)

46.

Y.-J. Yang*, C.-C. Chen and C.-K. Lee, “Thermo-piezoelectric Finite-element Modeling for Piezoelectric Transformers,” Japanese Journal of Applied Physics, Vol. 47, No. 4, pp. 2182-2188 (2008) (SCI/EI) (doi: 10.1143/JJAP.47.2182)

47.

Y.-J. Yang*, C.-Y. Kang and C.-K. Lee, “Optimization of Piezoelectric Transformers Using Genetic Algorithm,” Journal of Mechanics, Vol. 24, No. 2, pp. 119-125 (2008) (SCI/EI) (doi: 10.1017/S1727719100002148)

48.

Y.-J. Yang*, C.-C. Chen, Y.-M. Chen and C.-K. Lee, “Modeling of Piezoelectric Transformers Using Finite-Element Technique,” Journal of the Chinese Institute of Engineers, Vol. 31, No.6, pp. 925-932 (2008) (SCI/EI)

49.

Y.-J. Yang*, B T. Chia, D.-R. Chang, H.-H. Liao, W.-P. Shih, F.-Y. Chang, and K.-C. Fan, “Development of A Flexible Temperature Sensor Array System,” Key Engineering Materials , Vol. 381-382, pp. 383-386 (2008) (EI) (doi: 10.4028/www.scientific.net/KEM.381-382.383)

50.

Y.-J. Yang*, W.-C. Kuo, K.-C. Fan, and W.-L. Lin, “A 1x2 optical fiber switch using a dual-thickness SOI process,” Journal of Micromechanics and Microengineering (JMM), Vol. 17, pp. 1034-1041 (2007) (SCI/EI; IF: 2.499) (doi: 10.1088/0960-1317/17/5/025)

51.

Y.-J. Yang*, B.-T. Liao and W.-C. Kuo “A novel 2x2 MEMS optical switch using the split-cross-bar design,” Journal of Micromechanics and Microengineering (JMM), Vol. 17, pp. 875-882 (2007) (SCI/EI; IF: 2.499) (doi: 10.1088/0960-1317/17/5/005)

52.

L.-C. Chien, N.-F. Chiu, Adam S.-Y. Lee, L.-J. Yang, Y.-J. Yang, K.-C. Wu, C.-K. Lee, and C.-W. Lin*, “Electrochemical Detection of High-Sensitivity C-ReactiveProtein Based on Biomimic Design of Electroactive Nanoassembly Multilayers,” Journal of Bionanoscience, vol. 1, pp. 44-50 (2007)

53.

Y.-J. Yang*, M.-Y. Cheng, W.-Y. Chang, L.-C. Tsao, S.-A. Yang, W.-P. Shih, F.-Y. Chang, S.-H. Chang, and K.-C. Fan, “A Large Area Temperature and Tactile Sensing Array,” Key Engineering Materials (2007) (EI)

54.

Y.-J. Yang* and W.-C. Kuo, “Fabrication and Measurement of a 1x2 Optical Switch with Fiber-switching Design,” Tamkang Journal of Science and Engineering, (2007) (EI) (Accepted)

55.

W.-L. Lin, K.-C. Fan, L.-H. Chiang, Y.-J. Yang, W.-C. Kuo and T.-T. Chung, “A Novel Micro/Nano 1x4 Mechanical Optical Switch,” Journal of Micromechanics and Microengineering (JMM), Vol. 16, pp. 1408-1415 (2006) (SCI/EI; IF: 2.499)

56.

Y.-J. Yang*, W.-C. Kuo and K.-C. Fan, “A Single-run Single-mask ICP-RIE Process for Fabricating Suspended High-Aspect-Ratio MEMS Structures,” Japanese Journal of Applied Physics, Vol. 45, No 1A, pp. 305-310 (2006) (SCI/EI; IF:1.142)

57.

W.-C. Lin, Y.-J. Yang, G.-W. Hsieh, C.-H. Tsai, C.-C. Chen and C.-C. Liang, “Selective local synthesis of nanowires on a microreactor chip,” Sensor and Actuator A, Vol. 130/31, pp. 625-632 (2006) (SCI/EI; IF:1.462)

58.

Y.-J. Yang* and W.-C. Kuo, “A Novel Fabrication Method for Suspended High-Aspect-Ratio MEMS Structures,” Journal of Micromechanics and Microengineering (JMM), Vol. 15, pp. 2184-2193 (2005) (SCI/EI; IF: 2.499) (doi: 10.1088/0960-1317/15/11/027)

59.

Y.-J. Yang* and P.-C. Yen, “An Efficient Macromodeling Methodology for Lateral Air Damping Effects,” IEEE/ASME Journal of Microelectromechanical Systems (JMEMS) Vol. 14, No. 4, pp. 812-828 (2005) (SCI/EI; IF: 3.005) (NSC92 -2213-E-002-083)

60.

Y.-J. Yang* and K.-Y. Shen, “Nonlinear heat-transfer macromodeling for MEMS thermal devices,” Journal of Micromechanics and Microengineering (JMM) Vol. 15, pp. 408-418 (2005) (SCI/EI, IF: 2.499) (doi: 10.1088/0960-1317/15/2/022) (NSC92-2213-E-002-083)

61.

Y.-J. Yang* and H.-K. T ang, “A Parallelization Technique for Preconditioned Boundary-element-method Solvers,” Journal of Electromagnetic Waves and Applications (JEMWA) Vol. 19, No 6, pp. 811-826 (2005) (SCI/EI)

62.

Y.-J. Yang*, C.-M. Chien, M. Kamon, V. L. Rabinovich, and J. R. Gilbert, “Extraction of Frequency Dependent Macromodels for MEMS Squeeze-film Damping Effects,” Journal of Mechanics, Vol. 21, No. 4, pp. 227-234 (2005) (SCI/EI) (NSC92-2213-E- 002-083)

63.

Y.-J. Yang*, C.-C.Yu, and K.-Y. Shen, “MEMS Heat Transfer Arnoldi-based Macromodels and The Guideline of Choosing Minimum Required Orders,” Tamkang Journal of Science and Engineering, Vol. 8, No 3, pp. 185-190 (2005) (EI)

64.

Y.-J. Yang*, T.-H. Tsai and P.-Z. Chang, “Performance Study of a Micro Plasma Switch,” Journal of Chinese Mechanical Engineering,Vol. 25, No.6, pp. 475-484 (2004) (SCI/EI) (NSC92- CS-7-002–002)

65.

Y.-J. Yang*, S.-Y. Cheng and K.-Y. Shen, “Macromodeling of Coupled-Domain MEMS Devices with Electrostatic and Electrothermal Effects,” Journal of Micromechanics and Microengineering (JMM), Vol. 14, pp. 1191-1196 (2004) (SCI/EI; IF: 2.499) (doi: 10.1088/ 0960-1317/ 14/8/011) (NSC90-2218-E-002-031)

66.

Y.-J. Yang* and C.-C. Yu, “Extraction of heat-transfer macromodels for MEMS Devices,” Journal of Micromechanics and Microengineering (JMM), Vol. 14, pp. 587-596 (2004) (SCI/EI; IF: 2.499) (doi: 10.1088/0960-1317/14/4/020) (NSC91-2218-E-002-021)

 

Domestic Journal Article

 

1.

宋同正,張哲肇,李佳頤,候宜廷,張文瑋,楊燿州, “高齡者智慧健康照護之產品使用性研究-以智慧藥盒為例”, 人因工程學刊, 14, 第一期,  pp. 15-26 (2012)

2.

賴昱澤,馬政文,陳永明,林俊良,鄭茗元,楊燿州, “仿生人形機器人之發展-子計畫一:可撓式壓剪應力感測陣列系統之開發” , 工程科技通訊,111期, 第166-170頁, (2011)

3.

黃毓傑, 廖信宏, 黃本立, 楊燿州, 林啟萬, 呂學士, “植入式CMOS即時釋藥系統單晶片”, 零組件雜誌, 214, pp. 36-39 (2009)

4.

林啟萬, 呂學士, 施文彬, 楊燿州, 邱南福, 廖信宏, 蔡燿全, 歐育誠, 林志成, 黃敬文, 魯本立, 詹作晟, 方柏翔, 王常倫, 李義欽, 黃毓傑, 徐玄宗, 楊龍杰, 李雨, 趙福杉, 陳秋麟, 嚴家鈺, 李世元, 林世明, 李世光, 吳光鐘, “植入式多功能無線生醫感測系統研發”, 電子資訊, 15, 第一期, pp. 28-39 (2009)

5.

廖信宏, 黃毓傑, 黃榮章, 陳春豪, 黃榮山, 楊燿州, 林啟萬, 林世明, 呂學士, “無線生醫C-反應蛋白感測與即時釋藥治療系統設計”, 電子資訊, 15, 第一期, pp. 40-50 (2009)

6.

楊燿州、廖柏亭、郭文正,NxN複合式光開關之研製, 工程科技通訊.第九十六期, pp. 70-74 (2008)

7.

廖偉吉、張為堯、楊燿州, UHF RFID tag天線設計, 自動化科技學會會刊, Vol. 8, No. 4, pp. 12-19 (2007)

8.

楊燿州, 微奈米機電精簡模型平台之開發, 工程科技通訊.第八十三期, pp. 88-92 (2005)

9.

沈國曄, 楊燿州, “片段線性模型降階演算法在非線性微熱傳效應之應用”, 微系統暨奈米科技協會會刊第12, pp. 39-51 (2004)

10.

楊燿州, 微系統的分析及設計專題報導, 微系統暨奈米科技協會會刊第12, pp. 8 (2004)

11.

楊燿州, 微機電設計之流程及現況, 微系統暨奈米科技協會會刊第10, pp. 50-58 (2003)

12.

胡毓忠、楊燿州、黃榮山、張所鈜, 國科會北區微機電系統研究中心電腦輔助設計專題, 微系統暨奈米科技協會會刊第5, pp. 52-55 (2001)

 

 (B)          Conference Articles

 

1. Chao-Chi Yeh and Yao-Joe Yang, A Portable Miniaturized PB2+ Detector Using Ion-Responsive Hydrogel with Wireless Interrogation Capability, The 30th IEEE International Conference on Micro Electro Mechanical Systems(IEEE MEMS 2017), Las vegas, USA,  Jan. 22-26, 2017
2. Syuan-Wen Chen, Chao-Chi Yeh and Yao-Joe Yang, DC-Driven Acrylate-Copolymer-Based Electrothermal Oscillator and Its Application in Thermopneumatic Diffuser Pump,” The 30th IEEE International Conference on Micro Electro Mechanical Systems(IEEE MEMS 2017), Las vegas, USA,  Jan. 22-26, 2017

3.

Chao-chi Yeh, Yu-Hsuan Lin, Cheng-Wen Ma, Fu-Wei Lee, Yu-Yang Chang, Yao-Joe Yang, “Fabrication of Large-area Tunnelling Pizeoresistive Polymer Sheets Embedded with Microdome Structures,” 42th International Micro & Nano Engineering Conference (MNE 2016), Vienna, Austria, Sep. 19-23, 2016

4.

Chien-Liang Chu, Chao-Chi Yeh, Yao-Joe Yang, “Flexible Thermo-Electrochemical Cell Based on Buckypaper Interdigital Electrodes,” 42th International Micro & Nano Engineering Conference (MNE 2016), Vienna, Austria, Sep. 19-23, 2016

5.

C.-W. Ma, C.-M. Chang, H.-T. Hsueh, P.-H. Kuo, C.-T. Lin, C.-T. Lin, S.-S. Lu, and Y.-J. Yang, “A parylene micropipette array for enabling simultaneous detection of different target analytes on a CMOS sensor array,” The 29th IEEE International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2016), ShangHai, China, Jan. 24-Jan. 28, 2016.

6.

C.-M. Chang, F.-W. Lee, Y.-H. Lin, and Y.-J. Yang, “Tunneling piezoresistive tactile sensing array for continuous blood pressure monitoring,” The 29th IEEE International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2016), ShangHai, China, Jan. 24-Jan. 28, 2016.

7.

F.-W. Lee, W.-H. Hung, J.-W. Ma, and Y.-J. Yang, “A disposable parylene microneedle array for blood extraction assisted by vibrating motion for insertions,” The 29th IEEE International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2016), ShangHai, China, Jan. 24-Jan. 28, 2016.

8.

T.-H. Lin, C.-M. Chang, Y.-M. Huang, C.-W. Ma, T.-D. Wang, S.-S. Lu, and Y.-J. Yang, “Continuous Pulse Pressure Measuring Device Using Pressure Sensing Elements with Microstructures,” The 9th IEEE International Conference on Nano/Molecular Medicine and Engineering (IEEE NANOMED 2015), Hawaii, USA, Nov. 15-Nov. 18, 2015.

9.

C.-W. Ma, C.-M. Chang, and Y.-J. Yang, “Characterization of a high-sensitive flexible tactile sensing array,” The 41th Micro and Nano Engineering 2015 (MNE 2015), Hague, Netherlands, Sep. 21-Sep. 24, 2015.

10.

W.-H. Hung, F.-W. Lee, and Y.-J. Yang, “A disposable miniaturized blood extraction device with flexible parylene microneedles,” The 41th Micro and Nano Engineering 2015 (MNE 2015), Hague, Netherlands, Sep. 21-Sep. 24, 2015.

11.

C.-W. Ma, P.-C. Huang, and Y.-J. Yang, “A Paper-Like Supercapacitor With Patterned Buckypaper Electroneds Electrodes Using a Novel Vacuum Filtration Technique,” The 28th IEEE International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2015), Estoril, Portugal, Jan. 18-Jan. 22, 2015.

12.

C.-W. Ma, T.-H. Lin, and Y.-J. Yang, “Tunneling Piezoresistive Tactile Sensing Array Fabricated By a Novel Fabrication Process With Membrane Filters,” The 28th IEEE International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2015), Estoril, Portugal, Jan. 18-Jan. 22, 2015.

13.

J.-C. Kuo, C.-W. Ma, L.-S. Hsu, and Y.-J. Yang, “Modeling and Measurement of a Buckypaper-Based Strain Sensor,” The 40th Micro and Nano Engineering 2014 (MNE 2014), Lausanne, Switzerland, Sep. 22-Sep. 26, 2014.

14.

J.-C. Kuo, H.-W. Huang, and Y.-J. Yang, “Design Criteria for a MEMS Push-On-Push-Off  Bistable Device,” The 40th Micro and Nano Engineering 2014 (MNE 2014), Lausanne, Switzerland, Sep. 22-Sep. 26, 2014.

15.

C.-W. Ma, L.-S. Hsu, J.-C. Kuo, and Y.-J. Yang, “A Flexible Tactile and Shear Sensing Array Fabricated by A Novel Buckypaper Patterning Technique,” The 27th IEEE International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2014), San Francisco, USA, Jan. 26-Jan. 30, 2014.

16.

J.-C. Kuo, P.-H. Kuo, H.-T. Hsueh, C.-W. Ma, C.-T. Lin, S.-S. Lu, and Y.-J. Yang, “A Capacitive Immunosensor Using On-chip Electrolytic Pumping and Magnetic Washing Techniques for Point-Of-Care Applications,” The 27th IEEE International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2014), San Francisco, USA, Jan. 26-Jan. 30, 2014.

17.

S.-W. Tung, C.-H. Kuo, L.-S. Hsu and Y.-J. Yang, “Fabricating barbed microtip arrays by low-cost silicon wet etching techniques,” The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers’ 2013), Barcelona, Spain, Jun. 16-20, 2013.

18.

J.-C. Kuo, S.-W. Tung, and Y.-J. Yang, “A hydrogel-based intravascular microgripper manipulated using magnetic fields,” The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers’ 2013), Barcelona, Spain, Jun. 16-20, 2013.

19.

Y.-T. Lai and Y.-J. Yang, “A Novel Gas Sensor Using Polymer Dispersed Liquid Crystal Doped with Carbon Nanotubes,” IEEE-MEMS 2013, Taipei, Taiwan, 2013.

20.

C.-W. Ma, P.-C. Huang, Y.-L. Su, and Y.-J. Yang, “A Micromachined Solid-State Photo-rechargeable Supercapacitor,” The 5th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2013), Taipei, Taiwan, Nov. 12-Nov. 15, 2013.

21.

P.-C. Huang, C.-W Ma, W.-H. Hung, and Y.-J. Yang, “Synthesis of Star-Like ZnO Nanoparticles and Its Application in Dye-Sensitized Solar Cell,” The 12th International Conference on Automation Technology (Automation 2013), Tainan, Taiwan, Nov. 1-3, 2013.

22.

L.-S. Hsu, S.-W. Tung, C.-H. Kuo, and Y.-J. Yang, “Barbed Microtips Arrays for ECG Measurement,” The 12th International Conference on Automation Technology (Automation 2013), Tainan, Taiwan, Nov. 1-3, 2013.

23.

C.-W. Ma, P.-C. Huang and Y.-J. Yang, “A Novel Inertial Switch with Adjustable Acceleration Threshold by using MEMS Digital-to-Analog Converter,” The 38th International Micro & Nano Engineering Conference (MNE 2012), Toulouse, France, Sep. 16-20, 2012

24.

P.-C. Huang, T.-H. Tsai and Y.-J. Yang “A Wide-bandwidth Piezoelectric Energy Harvester Integrated with Parylene-C Beam Structure,” The 38th International Micro & Nano Engineering Conference (MNE 2012), Toulouse, France, Sep. 16-20, 2012

25.

J.-C. Kuo and Y.-J. Yang, “A Passive Hydrogel-based Inertial Switch Integrated With Micromachined L-C Resonator,” The 24th IEEE International Conference on Micro Electro Mechanical Systems (IEEE MEMS 2012), Paris, France, Jan. 27-Feb. 2, 2012.

26.

P.-H. Kuo, J.-C. Kuo, Y.-J. Yang, T. Wang and S.-S. Lu, “A Hydrogel-Based Implantable Wireless CMOS Glucose Sensor SoC,” 2012 IEEE International Symposium on Circuits and Systems (ISCAS 2012), Seoul, Korea, May 20-23, 2012.

27.

W.-W. Chang, J.-C. Kuo, J.-J. Chang, H.-W. Huang, Y.-T. Hou, W.-C. Hsu, C.-W. Kuo, Y.-C. Lan, T.-J. Sung and Y.-J. Yang, “A Smart medication system using wireless sensor network technologies,” The 8th International conference on Networked Sensing System (INSS 2011), Penghu, Taiwan, Jun. 12-15, 2011.

28.

Y.-T. Lai, Y.-M. Chen, C.-T. Chen and Y.-J. Yang, “Development of Shear Sensing System for a Three-Finger Robot Hand,” IEEE ROBIO 2011, Phuket Island, Thailand, Dec. 7-11, 2011 (Oral presentation)

29.

Y.-C. Lan, S.-W. Tung and Y.-J. Yang, “A Carbon-Nanotube Resistive Respiratory Sensor by using Dielectrophoresis Technique,” Eurosensors 2011, Athens, Greece, Sep. 4-7, 2011.

30.

Y.-T. Lai and Y.-J. Yang, “A Tactile Sensing Array With Tunable Sensing Ranges Using Liquid Crystal And Carbon Nanotubes Composites,” IEEE MEMS 2011, Cancun, Mexico, 2011.

31.

Y.-M. Chen, Y.-T. Lai and Y.-J. Yang, “A Novel Tactile Sensing Array With Image Retaining And Erasing Capability Using CNT-PDMS Polymer Mixed By Dielectrophoresis,” IEEE MEMS 2011, Cancun, Mexico, 2011.

32.

Y.-T. Lai, C.-L. Lin, X.-H. Huang, M.-Y. Cheng and Y.-J. Yang, “A Flexible Tactile Sensing Array for Robot Applications,” The 9th Annual IEEE Conference on Sensors, 2010.

33.

H.-H. Liao and Y.-J. Yang, “A Linnik scanning white-light interferometry system using a MEMS digital-to-analog converter,” Eurosensors 2010, Linz, Austria, Sep. 5-8, 2010.

34.

W.-C. Hsu, C.-W. Kuo, W.-W. Chang, J.-J. Chang, Y.-T. Hou, Y.-C. Lan, T.-J. Sung and Y.-J. Yang, “A WSN Smart Medication System,” Eurosensors 2010, Linz, Austria, Sep. 5-8, 2010.

35.

B. T. Chia, C.-W. Ma, B.-T. Liao, S.-C. Shih, and Y.-J. Yang, “Development of a 2x2 Optical Switch Using Bi-stable Solenoid-Based Actuators,” Optical MEMS and Nanophotonics 2010, Sapporo, Japan, Aug. 9-12, 2010.

36.

M.-Y. Cheng, C.-L. Lin and Y.-J. Yang, “Tactile and shear stress sensing array using capacitive mechanisms with floating electrodes,” IEEE MEMS 2010, Hong Kong, Jan. 24-28, 2010 (accepted for oral presentation)

37.

B. T. Chia, X.-Y. Yang, M.-Y. Cheng, and Y.-J. Yang, “A DNA-extraction and Polymerase-chain-reaction Microchip Using Magnetic Beads and Thermo-pneumatic Valves,” IEEE MEMS 2010, Hong Kong, Jan. 24-28, 2010.

38.

H.-H. Liao, H.-H. Shen, B.-T. Liao, Y.-C. Chen, W.-W. Pai, and Y.-J. Yang, “A MEMS-based Electrostatic Resonator Used for the Application of Fast-Scanning Scanning Tunneling Microscopy,” IEEE-NEMS 2010, Xiamen, China, Jan. 20-23, 2010.

39.

H.-H. Liao and Y.-J. Yang, “A Microelectromechanical Digital-to-Analog Converter As The Step-Motion Reference Mirror for A White-Light Interferometry System,” IEEE NEMS 2010, Xiamen, China, Jan. 20-23, 2010.

40.

M.-Y. Cheng, B.-T. Liao, X.-H. Huang and Y.-J. Yang*, “ A flexible tactile sensing array based on novel capacitance mechanism,” in Proc. 15th International Conference on Solid-State Sensors, Actuators and Microsystems Conference, 2009 (Transducers' 09), Denver, USA, June 21-25, 2009.

41.

B. T. Chia, H.-H. Liao and Y.-J. Yang, “A Novel Thermo-pneumatic Micropump with Low Temperature Elevation,” in Proc. 15th International Conference on Solid-State Sensors and Actuators (Transducers' 09), Denver, Colorado, U.S.A., June, 2009.

42.

Y.-J. Yang*, Y.-J. Huang, H.-H. Liao, T. Wang, P.-L. Huang, C.-W. Lin, Y.-H. Wang, and S.-s. Lu, “A Release-on-Demand Wireless CMOS Drug Delivery SoC Based on Electrothermal Activation Technique,” ISSCC 2009,San Francisco, USA, Feb. 8-12, 2009 (oral presentation)

43.

M.-Y. Cheng, C.-M. Tsao and Y.-J. Yang, “A Novel Highly-twistable Tactile Sensing Array Using Extendable Spiral Electrodes,” IEEE MEMS 2009, Sorrento, Italy, Jan. 25-29, 2009.

44.

B T. Chia, S.-A. Yang, M.-Y. Cheng, C.-L. Lin, C.-W. Lin and Y.-J. Yang, “A Self-contained Miniaturized PCR System,” IEEE MEMS 2009, Sorrento, Italy, Jan. 25-29, 2009.

45.

Y.-C. Tsai, N.-F. Chiu, P.-C. Liu, Y.-C Ou, H.-H. Liao, Y.-J. Yang, L.-J. Yang, U. Lei, F.-S. Chao, S.-S. Lu, C.-W. Lin and W.-P. Shih, “Fabrication Process of Integrated Multi-analyte Biochip System for Implantable Applications,” IEEE MEMS 2009, Sorrento, Italy, Jan. 25-29, 2009.

46.

Y.-J. Yang, M.-Y. Cheng, C.-L. Lin, C.-M. Tsao, S.-A. Yang, W.-P. Shih, F.-Y. Chang, and K.-C. Fan, “A Wireless Flexible Temperature and Tactile Sensing Array for Robot Applications,” ISPMM 2008, Hefei, Anhui, China, Aug. 25-29, 2008.

47.

C.-L. Lee, C.-W. Lee, L.-C. Tsao, W.-P. Shih, Y.-J. Yang, and K.-C. Fan, “A comparison of polymer composites for development of flexible sensor array,” ISPMM 2008, Hefei, Anhui, China, Aug. 25-29, 2008.

48.

B.-T. Liao and Y.-J. Yang, “Fabrication and Measurement of a Hybrid Optical Switch,” APCOT 2008, Tainan, Taiwan, Jun. 22-25, 2008.

49.

H.-H. Liao, W.-C. Liao, and Y.-J. Yang, “Design, Fabrication and Characterization of Thermopneumatic Peristaltic Micropumps,” APCOT 2008, Tainan, Taiwan, Jun. 22-25, 2008.

50.

B.-T. Liao and Y.J. Yang, “Development of A 4X4 Hybrid Optical Switch,” Nanotach 2008, Boston, USA, Jun. 1-5, 2008, pp. 474-477.

51.

H.-H. Liao, W.-C. Liao and Y.-J. Yang, “Fabrication and Characterization of Thermo-pneumatic Peristaltic Micropumps,” Nanotach 2008, Boston, USA, Jun. 1-5, 2008, pp. 296-299.

52.

Y.-J. Yang*, B T. Chia, D.-R. Chang, H.-H. Liao, W.-P. Shih, F.-Y. Chang, and K.-C. Fan, “Development of A Flexible Temperature Sensor Array System,” ISMTII 2007, Sendai, Japan, Sep. 24-27, 2007.

53.

Y.-J. Yang*, M.-Y. Cheng, W.-Y. Chang, L.-C. Tsao, S.-A. Yang, W.-P. Shih, F.-Y. Chang, S.-H. Chang, and K.-C. Fan, “A Large Area Temperature and Tactile Sensing Array,” ISMTII 2007, Sendai, Japan, Sep. 24-27, 2007.

54.

M.-Y. Cheng, W.-Y. Chang, L.-C. Tsao, S.-A. Yang, Y.-J. Yang*, W.-P. Shih, F.-Y. Chang, S.-H. Chang, and K.-C. Fan, “Design and Fabrication of an Artificial Skin Using PI-copper Films,” IEEE MEMS 2007, Kobe, Japan, Jan. 21-25, 2007.

55.

B. T. Chia, D.-R. Chang, H.-H. Liao, Y.-J. Yang, W.-P. Shih, F.-Y. Chang, and K.-C. Fan, “Temperature Sensor Array Using Flexible Substrate,” IEEE MEMS 2007, Kobe, Japan, Jan. 21-25, 2007.

56.

C.-C. Chen, C.-W. Kuo, C.-K. Lee and Y.-J. Yang, “Finite-Element Simulation of the Temperature Distribution in a Piezoelectric Transformer,” ICAST 2006, Taipei, Taiwan, Oct. 16-19, 2006.

57.

Y.-J. Yang*, H.-H. Liao, K.-H. Huang, Y.-Y. Huang, C.-W. Lin, L.-J. Yang, F.-S. Jaw, P.-Z. Chang and C.-K. Lee, “Novel Designs of Herringbone Chaotic Mixers,” Proceedings of IEEE NEMS (2006)

58.

B.-T. Liao, W.-C. Kuo and Y.-J. Yang, “Development of a new micromachined 2X2 optical switch without optical misalignment,” Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT), Singapore, Jun. 2006.

59.

W.-Y. Chang and Y.-J. Yang, “Development of RFID Tag Antennas Using MEMS Fabrication Process,” Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT), Singapore, Jun. 2006.

60.

H.-H. Liao, T.-T. Chia, Y.-L. Chu and Y.-J. Yang, “White-light scanning interferometry using the stroboscopic principle,” Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT), Singapore, Jun. 2006.

61.

C.-W. Kuo, C.-M. Chien and Y.-J. Yang, “Macromodeling for Microfluidic Channels,” Nanotech 2006, Boston, USA, May 7-12, 2006.

62.

C.-Y. Kang, C.-K. Lee and Y.-J. Yang, “Optimization of Piezoelectric Transformers Using Genetic Algorithm,” Nanotech 2006, Boston, USA, May 7-12, 2006.

63.

W.-C. Kuo and Y.-J. Yang, “Design and Fabrication of a 1x2 SOI Optical Fiber Switch,” in Proc. of ICMT 2005, Juala Lumpur, Malaysia, Dec, 2005.

64.

W.-C. Kuo and Y.-J. Yang, “A Novel Fabrication Method for Suspended High-Aspect-Ratio MEMS Structures,” in Proc. 13th International Conference on Solid-State Sensors and Actuators (Transducers' 05), Seoul, Korea, June, 2005.

65.

W.-C. Lin, Y.-J. Yang, G.-W. Hsieh, C.-H. Tsai, C.-C. Chen and C.-C. Liang, “Selective Local Synthesis of Nanowires on a Microreactor Chip,” in Proc. 13th International Conference on Solid-State Sensors and Actuators (Transducers' 05), Seoul, Korea, June, 2005.

66.

H.-H. Liao and Y.-J. Yang, “MEMS/NEMS Dynamics Measurement Tool Using The Stroboscopic Principle,” Nanotech 2005, Anaheim, USA, May 8-12, 2005.

67.

Y.-M. Chen, C.-K. Lee and Y.-J. Yang, “Development of a 3-D Finite-element Solver for Piezoelectric Transformer Analysis,” Nanotech 2005, Anaheim, USA, May 8-12, 2005.

68.

P.-C. Yen and Y.-J. Yang, “Guidelines of Creating Krylov-subspace Macromodels for Lateral Viscous Damping Effects,” Nanotech 2004, Boston, USA, March, 2004.

69.

H.-K. Tang and Y.-J. Yang, “Parallelization of BEM Electrostatic Solver Using a PC Cluster,” Nanotech 2004, Boston, USA, March, 2004.

70.

P.-C. Yen and Y.-J. Yang, “Macromodels of 3D Lateral Viscous Damping Effects for MEMS Devices,” in Proc. 12th International Conference on Solid-State Sensors and Actuators (Transducers' 03), Boston, USA, June, 2003, pp. 1848-1851.

71.

C.-C. Yu and Y.-J. Yang, “Extraction of Heat Transfer Macromodels for MEMS Devices,” in Proc. 12th International Conference on Solid-State Sensors and Actuators (Transducers' 03), Boston, USA, June, 2003, pp. 1852-1855.

72.

S.-Y. C, C.-C. Yu and Y.-J. Yang, “Coupled-domain Nonlinear Macromodels and Pull-in Characteristics with Electro-Thermal Effect,” in Proc. 12th International Conference on Solid-State Sensors and Actuators (Transducers' 03), Boston, USA, June, 2003, pp. 1104-1107.

73.

C.-C. Yu and Y.-J. Yang, “Compact Heat Transfer Model Generation for MEMS Devices,” MSM 2003, San Francisco, USA, Feb. 2003.

74.

T.-H. Tsai, H.-K. Tang and Y.-J. Yang, A Methodology of Field-Emission Modeling with Space-Charge Effects,” MSM 2003, San Francisco, USA, Feb. 2003.

75.

P.-C. Yen and Y.-J. Yang, “Time-Domain Reduced-Order Models of Lateral Viscous Damping Effects for 3-D Geometries,” MSM 2002, Puerto Rico, USA, pp190-193.

76.

Y.-J. Yang and C.-C. Yu, “Macromodel Extraction of Gas Damping Effects for Perforated Surfaces with Arbitrarily-Shaped Geometries,” MSM 2002, Puerto Rico, USA, pp. 178-181.

77.

Y.-J. Yang, et.al., “Modeling Gas Damping and Spring Phenomena in MEMS With Frequency Dependent Macro-Models,” MEMS 2001, Interlaken, Switzerland, Jan. 2001.

78.

Y.-J. Yang, et. Al.,”Extraction of Frequency Dependent Macromodel for Gas Damping and Spring Effects for MEMS Devices,” 2000 Solid-State Sensor and Actuator Workshop, Hilton Head, SC, June 2000.

79.

Y.-J. Yang, F. T. Korsmeyer, V. Rabinovich, M. Ding, S. D. Senturia, and A. I. Akinwande, “An Efficient 3-Dimensional CAD Tool for Field-Emission Devices,” International Electron Devices Meeting (IEDM) 1998, San Francisco, Dec 1998.

80.

Y.-J. Yang, M. Gretillat and S. D. Senturia, “Effect of Air Damping on the Dynamics of Nonuniform Deformations of Microstructures,” in Proc. 9th International Conference on Solid-State Sensors and Actuators (Transducers' 97), Chicago, June 1997, pp. 1093-1096.

81.

E. Hung, Y.-J. Yang and S. Senturia, “Low-Order Models for Fast Dynamical Simulation of MEMS Microstructures,” Transducers' 1997, Chicago, June 1997, pp. 1101-1104.

82.

M.-A. Grétillat, Y.-J. Yang, E. S. Hung, V. Rabinovich, G. K. Ananthasuresh, N. F. de Rooij and S. D. Senturia, “Nonlinear Electromechanical Behavior of an Electrostatic,” Transducers' 1997, Chicago, June 1997.

83.

Y.-J. Yang and S. D. Senturia, “Numerical Simulation of Compressible Squeezed-Film Damping,” 1996 Solid-State Sensor and Actuator Workshop, Hilton Head, SC, June 1996.

84.

R. K. Gupta, E. S. Hung, Y.-J. Yang, G. K. Ananthasuresh, and S. D. Senturia, “Pull-in Dynamics of Electrostatically-Actuated Beams,” Semiconductor Research Copporation (SRC) TECHCOM 1996.

85.

R. K. Gupta, Y.-J. Yang, E. S. Hung, G. K. Ananthasuresh, and S. D. Senturia, “Pull-in Dynamics of Electrostatically-Actuated microstructures,” 1996 Solid-State Sensor and Actuator Workshop, Late News, Hilton Head, SC, June 1996.

86.

Y.-J. Yang and C.-J. Kim, “Stability Criteria for Switching of a Bistable Microactuator,” Dynamic Systems and Control Vol. 2 (DSC-Vol. 57-2), International Mechanical Engineering Congress and Exposition, San Francisco, CA, Nov. 1995, pp.861.

87.

Y.-J. Yang and C.-J. Kim, “Dynamics of a Bistable Snapping Microactuator,” Proc. Smart Structures and Integrated Systems (SPIE Proc. Vol. 2443), Smart Stuctures and Materials 1995, San Diego, CA, Feb. 1995, pp. 754-762.

88.

Y.-J. Yang and C.-J. Kim, “Testing and Characterization of a Bistable Snapping Microactuator Based on Thermo-Mechanical Analysis,” 8th International Conference on Solid-State Sensors and Actuators (Transducers '95), Stockholm, Sweden, June 1995, Vol. 2.

89.

 

C.-J. Kim and Y.-J. Yang, “A Bistable Microactuator and Its Mechanical Analysis,” Joint Applied Mechanics and Materials Summer Conference of ASME, Los Angeles, CA, June 1995, pp. 239-240.

90.

Y.-J. Yang, C.-J. Kim, H. Matoba, and R. S. Muller, “Thermal Analysis of a Bistable Microactuator,” Dynamic Systems and Control Vol. 2 (DSC-Vol. 55-2), International Mechanical Engineering Congress and Exposition, Chicago, IL, Nov. 1994, pp. 687-693.

 

國內研討會:

 

1.

許力升, 林廷澔, 楊燿州,“巴克紙應用於應變及觸覺感測器之壓阻模型與驗證”, 2015兩岸量測與檢測科技學術研討會(CSCMIT2015), 桃園, 臺灣, 2015.

2.

馬政文, 黃柏承, 楊燿州,“利用微機電技術製作之固態光電容”, 第二十二屆全國自動化科技研討會(Automation 2014), 雲林, 臺灣, 2014.

3.

鄭學謙, 董書瑋, 許力升, 郭哲希, 楊燿州,“具倒鉤微針乾式電極陣列之研製及其於腦波量測的應用”, 第二十二屆全國自動化科技研討會(Automation 2014), 雲林, 臺灣, 2014.

4.

郭瑞昌, 張家銘, 楊燿州,“利用磁場驅動之水膠微型手爪製程”, 第二十二屆全國自動化科技研討會(Automation 2014), 雲林, 臺灣, 2014.

5.

黃柏承, 蘇晏立, 楊燿州, “巴克紙複合電極材料之製備及其於超級電容器之應用”, 2012 第二十屆全國自動化科技研討會, 桃園, 臺灣, 2012.

6.

李崇碩, 郭瑞昌, 楊燿州, “超順磁性光阻懸浮結構之製作與特性量測”, 2012 第二十屆全國自動化科技研討會, 桃園, 臺灣, 2012.

7.

郭哲希、董書瑋、楊燿州, “微機電技術應用於倒鉤狀乾式腦電波電極之研製”, 2012 第二十屆全國自動化科技研討會, 桃園, 臺灣, 2012.

8.

古曰寧、陳煥文、楊燿州, “三維積體電路封裝之熱分佈研究”, 2012 第二十屆全國自動化科技研討會, 桃園, 臺灣, 2012.

9.

張文瑋, 張哲肇, 徐暐智, 侯宜廷, 宋同正, 楊燿州, “智慧服藥提醒系統和使用者測試分析”, 第六屆無線隨意及感測器網路研討會, Taipei, Taiwan, Sep. 2-3, 2010.

10.

廖信宏, 楊燿州, “微機電式數位類比轉換機構應用於白光干涉系統之微鏡面驅動”, 第十四屆奈米工程暨微系統技術研討會, Kaohsiung, Taiwan, Sep. 2-3, 2010.

11.

廖信宏, 廖柏亭, 施順智, 蔡東湘, 楊燿州, “雙穩態電磁致動式2×2光開關之開發”, 第十四屆奈米工程暨微系統技術研討會, Kaohsiung, Taiwan, Sep. 2-3, 2010.

12.

馬政文, 鄭茗元, 楊燿州, “陣列型多感測感知技術研究”, 第十八屆全國自動化科技研討會, Jungli, Taiwan, June 25-26,  2010.

13.

徐暐智, 郭崎煒, 張文瑋, 藍奕中, 張百佑, 侯芊帆, 宋同正, 楊燿州, “智慧服藥提醒與分藥系統之開發”, 2010第十八屆全國自動化科技研討會, Jhongli, Taiwan, June. 25-26, 2010.

14.

Y.-T. Lai, C.-T. Chen, C.-L. Lin, M.-Y. Cheng and Y.-J. Yang, “大面積可撓式壓力感測陣列系統之開發”, in Proc. of 第五屆無線隨意及感測器網路研討會, Hsinchu, Taiwan, Sep. 2009.

15.

C.-M. Tsao, M.-Y. Cheng and Y.-J. Yang, “Highly Twistable Tactile Sensing Array for Humanoid Robot Applications,” Proceedings of the 26th National Conference on Mechanical Engineering of CSME, 2009.

16.

邱南福, 廖信宏, 蔡燿全, 歐育誠, 林志成, 黃敬文, 魯本立, 詹作晟, 黃毓傑, 徐玄宗, 施文彬, 楊燿州, 楊龍杰, 李雨, 趙福杉, 陳秋麟, 呂學士, 顏家鈺, 李世元, 林世明, 李世光, 吳光鐘, 林啟萬, “植入式多參數無線生醫保健監測系統之開發”, 2008生物醫學工程科技研討會, Taoyuan, Taiwan, Dec. 12-13, 2008.

17.

林威佐, 劉佩群, 邱南福, 廖信宏, 蔡燿全, 歐育誠, 魯本立, 施文彬, 楊燿州, 楊龍杰, 趙福杉, 李世光, 吳光鐘, 林啟萬, “具高分子保護膜之植入式多功能酵素型感測系統晶片”, 2008生物醫學工程科技研討會, Taoyuan, Taiwan, Dec. 12-13, 2008.

18.

廖偉吉, 廖信宏, 楊燿州, “蠕動式微幫浦之製作與性能分析”, 第十一屆奈米工程暨微系統技術研討會, Taichung, Taiwan, Aug. 30-31, 2007.

19.

W.-C. Kuo and Y- J. Yang, “新式高深寬比懸浮MEMS結構之製程”, in Proc. of 第七屆奈米工程暨微系統技術研討會, Hsinchu, Taiwan, Dec. 2004.

20.

K.-Y. Shen and Y- J. Yang, “Nonlinear Heat-Transfer Macromodeling for MEMS Thermal Devices, in Proc. of 第七屆奈米工程暨微系統技術研討會, Hsinchu, Taiwan, Dec. 2004.

21.

陳雅媚,康家瑜,李世光,楊燿州, “壓電計算軟體的發展與壓電變壓器的分析”, in Proc. of the 20th National Conference on Mechanical Engineering, Kaoshiung, Taiwan, Nov. 2004.

22.

湯化昆,張為堯,楊燿州, “預優化邊界元素計算之平行化技術”, in Proc. of the 20th National Conference on Mechanical Engineering, Kaoshiung, Taiwan, Nov. 2004.

23.

S. C. Yang, K. H. Huang, K. Y. Shen, Y.-J. Yang, and P. Z. Chang, “Miniaturization and Design of A High-Speed Plasma Switch,” in Proc. of the 7th International Conference on Mechatronics Technology (ICMT2003), Taipei, Taiwan, December 2003, pp. 319-323.

24.

W.-C. Kuo and Y.-J. Yang, “Design and fabrication of 1X2 optical fiber switch,” in Proceedings of the 7th International Conference on Mechatronics Technology (ICMT 2003), Taipei, Taiwan, R.O.C, Dec. 2003, pp. 421-424.

25.

C.-C. Yu, K.-Y. Shen, and Y.-J. Yang, “MEMS Heat Transfer Arnoldi-based Macromodels and The Guideline of Choosing Minimum Required Orders,” in Proceedings of the 7th International Conference on Mechatronics Technology (ICMT 2003), Taipei, Taiwan, R.O.C, Dec. 2003, pp. 367-372.

26.

游晢嘉,陳雅媚,楊燿州, “精簡模型在微機電熱傳分析之應用”, 中華民國第二十七屆全國力學會議, Tainan, Taiwan, Dec. 2003.

27.

S. Y. Cheng, H. H. Liao, K. C. Chuang and Y.-J. Yang, “Extracting Macromodel from Coupled-domain Pull-in Behavior with Electro-Thermal Effect,” in Proc. of 第七屆奈米工程暨微系統技術研討會, Taipei, Taiwan, Nov. 2003.

28.

P.-C. Yen and Y-J Yang, “Macromodels of 3D Lateral Viscous Damping Effects for MEMS Devices,” in Proc. of 第七屆奈米工程暨微系統技術研討會 (國科會計劃結案報告), Taipei, Taiwan, Nov. 2003.

29.

K. L. Cheng, C. M. Chien, and Y.-J. Yang, “Applications of Piecewise-Linear Algorithm for MEMS Device,” in Proc. of the 20th National Conference on Mechanical Engineering, E冊新興工業技術上集, December 2003, pp. 65-72.

30.

陳雅媚,楊燿州, “模態壓電變壓器之分析”, in Proc. of the 20th National Conference on Mechanical Engineering, E冊新興工業技術上集, December 2003.

31.

P.-C. Yen and Y.-J. Yang, “Compact Microfludic Model and Experimental Verification of 3D Viscous Lateral Damping Effects for MEMS Devices,” International Meeting on Microsensors and Microsystems, Tainan, Taiwan, Jan. 12-14, 2003, pp. 40-41.

32.

Y.-J. Yang and C.-C. Yu, “Macromodel Extraction of Gas Damping Effects for Perforated Surfaces with Arbitrarily-Shaped Geometries,” 6th MSTA, Tainan, Taiwan, 2002.

33.

Y.-W. Lee, S-Ch Yang, and Y.-J. Yang, Solomon J.H. Lee, and Pei-Zen Chang “Design and Fabrication of Micro High Power Ignition Device,” 6th MSTA, Tainan, Taiwan, 2002.

34.

T.-H. Tsai, Y-W Lee, Y.-J. Yang, Solomon J.H. Lee, and P-Z Chang, “Modeling of Emission Phenomena for Integrated Silicon Plasma Switch,” AMTE 2002, Chai-Yi, Taiwan, Aug. 2002.

35.

C.-C. Yu and Y.-J. Yang, “Compact Heat Transfer Model Generation for MEMS Devices with Arbitrary 3D Geometries,” AMTE 2002, Chai-Yi, Taiwan, Aug. 2002.

 

(C)            專書及專書論文:

 

1.

楊燿州, “微機電系統之模擬與分析技術” (第十二章主編), 微機電系統技術與應用, 行政院國家科學委員會, 精密儀器發展中心出版, 2003.

2.

Y.-J. Yang, Design Strategy and Numerical Analysis of Field Emission Devices,” doctoral dissertation in Electrical Engineering, MIT, 1999.

3.

Y.-J. Yang, “Squeeze-film damping for MEMS Structures,” master thesis in    Electrical Engineering, MIT, 1997.

4.

Y.-J. Yang, “Characterization of a Bistable Thermal Microactuator,” master thesis in Mechanical Engineering, UCLA, 1995.

 

 


 
 

  地址:台北市106 羅斯福路四段1號工學院綜合大樓123室
電話:(02)3366-4941
  Copyright © 2008 NTUME MEMS Lab. All Rights Reserved.